The Supernode is an all-analog, dual overdrive pedal designed with versatility in mind. The layout is divided left and right into two sections. The right side is our version of the iconic ODR. All the tone and feel with the addition of a post-clipping Bass control and an internal trimmer to adjust the amount of pre-clipping low frequencies labeled Saturation. The left side is a modified version of the Seventy4 Deluxe Green channel. All of the 70’s Super Lead punch and growl with a simplified layout. Should you find yourself missing the Mids control, there is a trimmer inside that is just that.
In addition to the two killer circuits, we’ve incorporated the LPD order select switching system. Allowing ODR into Seventy4 (RL), Seventy4 into ODR (LR) or ODR and Seventy4 in parallel (//).
Additionally this system has three programmable bypass modes.
Independent- allows each foot switch to control it’s own circuit independently.
Toggle- if you find you never stack the circuits this mode is for you, just press the switch of the side you want to activate and the other side automatically bypasses.
Master- if you always stack the circuits this is your mode, no matter which switch you press both sides turn on or off together.
9 volt 30mA operation
4.75”L x 3 75”W x 2”H
14oz (395g)
The Supernode is an all-analog, dual overdrive pedal designed with versatility in mind. The layout is divided left and right into two sections. The right side is our version of the iconic ODR. All the tone and feel with the addition of a post-clipping Bass control and an internal trimmer to adjust the amount of pre-clipping low frequencies labeled Saturation. The left side is a modified version of the Seventy4 Deluxe Green channel. All of the 70’s Super Lead punch and growl with a simplified layout. Should you find yourself missing the Mids control, there is a trimmer inside that is just that.
In addition to the two killer circuits, we’ve incorporated the LPD order select switching system. Allowing ODR into Seventy4 (RL), Seventy4 into ODR (LR) or ODR and Seventy4 in parallel (//).
Additionally this system has three programmable bypass modes.
Independent- allows each foot switch to control it’s own circuit independently.
Toggle- if you find you never stack the circuits this mode is for you, just press the switch of the side you want to activate and the other side automatically bypasses.
Master- if you always stack the circuits this is your mode, no matter which switch you press both sides turn on or off together.
9 volt 30mA operation
4.75”L x 3 75”W x 2”H
14oz (395g)
